Related to heat transfer metal key chain, metal lighter image production matters

2022-11-29

Metal key chain can be directly from the market to buy back the finished product, with soaking method processing coating, do not have to take out the need to photocopy the image of the piece of small metal, generally choose frosted effect is better. After drying, the coating can be heated for three or four minutes with a hand-held flatbed machine (direct heat transfer with double-sided baking printer). As hanging on the key string often collids with the key piece, the pattern is easy to flake off, and a layer of crystal soft glue can be added.

There are two kinds of metal lighter: coal (steam) oil lighter and liquefied petroleum gas lighter. When the image is baked, the screw must be loosened (if there is one), the inner core must be removed and reheated. You can use a hard bottom flat plate machine pad a heat transfer pattern of soft silica gel heat transfer, or would rather use an iron bucket, it is better not to use an ordinary baking tray machine to bake printing, otherwise it is easy to cause damage to the heating film of the baking tray.

Henan Zhongliqi sublimation ink factory specializing in the production of thermal sublimation ink, thermal transfer ink, sublimation thermal transfer ink, sublimation ink manufacturers. Including: offset printing sublimation ink, screen printing sublimation ink, gravure sublimation ink, sublimation thermal transfer ink. Looking forward to your call!

Contact Person:

Miss Li: 13298345127